More Product Information
Get Datasheets and MSDS Information for the Sherwin-Williams products featured on this site.

Available for all Aircraft is the disposable KwikKit® 2K Paint Touch-up Kit. Click here for more info.

HARTZELL Propeller Colors Now Available in Aerosols & Quarts.

  • A6741-145-1  |  Black
  • A6741-146-1  |  Gray
  • A6741-147-1  |  White
  • A6741-148-1  |  Gray Metallic
  • A6741-149-1  |  Red
  • A6741-150-1  |  Yellow
  
 
Single Component Water Reducible Polyurethane Dispersion

JetFlex WR is a low VOC, single component water reducible polyurethane dispersion intended for the aircraft interior market. As a smooth or textured coating system on structural foam or injection molded plastic or treated steel, it provides performance properties similar to two component solvent based polyurethane.

Meets FAA FAR 25.853 regulations, Low VOC content, No free isocyanate health hazard, water based, no flash point, excellent hardness, lead and chromate free.

JetFlex WRAssociated Products:

F & P - Series Colors    JetFlex WR (All Colors)     MSDS | Product Data Sheet

Metal Pretreatment Systems

If JetFlex is to be applied over steel or aluminum,  substrate should be properly treated and coated with the proper products.

Metal Pretreatment Systems: call for details

Recommended Primer systems:

480-930/120-930 JetFlex Polyurethane Primer
Two-Component Primer 7:1 Mix ratio.

481-505 JetFlex Spray Fill Primer
Single Component Primer

*Other primers are available for specific applications; please call ACI for further details.