More Product Information
Get Datasheets and MSDS Information for the Sherwin-Williams products featured on this site.

Available for all Aircraft is the disposable KwikKit® 2K Paint Touch-up Kit. Click here for more info.

HARTZELL Propeller Colors Now Available in Aerosols & Quarts.

  • A6741-145-1  |  Black
  • A6741-146-1  |  Gray
  • A6741-147-1  |  White
  • A6741-148-1  |  Gray Metallic
  • A6741-149-1  |  Red
  • A6741-150-1  |  Yellow
  
 
Low Gloss Polyurethane

JetFlex Low Gloss Polyurethane is a two component polyurethane coating formulated for the finishing and refinishing of plastic and metal components within the cabin and cockpit of commercial aircraft. JetFlex products meet the Boeing 10-83D Ty II & III specification and FAA FAR 25.853 regulation.

Meets flammability, yellowing resistance and smoke stain requirements of the Boeing BMS 10-83D spec. fast drying, very good physical and chemical resistance, and excellent flexibility. Mix ratio 7:1

JetFlex Associated Products:

E- & L-Series Colors    JetFlex Intermix Colors    MSDS | Product Data Sheet
CM0981520    JetFlex Hardener/Catalyst    MSDS | Product Data Sheet
CM0481505    JetFlex Sprayfil Primer WR    MSDS | Product Data Sheet
CM0480930    JetFlex Primer    MSDS | Product Data Sheet
CM0120930    JetFlex Hardener/Catalyst    MSDS | Product Data Sheet
CM0110845    JetFlex Reducer    MSDS | Product Data Sheet

Metal Pretreatment Systems

If JetFlex is to be applied over steel or aluminum,  substrate should be properly treated and coated with the proper products.

Metal Pretreatment Systems: call for details

Recommended Primer systems:

480-930/120-930 JetFlex Polyurethane Primer
Two-Component Primer 7:1 Mix ratio.

481-505 JetFlex Spray Fill Primer
Single Component Primer 

*Other primers are available for specific applications; please call ACI for further details.